View DF4-9PA-2R28_1232315.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2mm Pitch Connector Directly Mounted on Board
DF4 Series
sFeatures
1. Cost Saving for Header
Thanks to the insertion/extraction socket and the harness product at the both connector edges, one of two headers necessary at both edge sockets can be saved without losing the function to separate individual boards.
2. Miniature and Multiple Contacts
The miniature connector has broad variations in contact number. Board mounting height : Maximum contact number :
4mm (Crimping ) 32 contacts (Crimping )
Height 4mm
3. Board Pre-fixed Mechanism
The insertion state to the board is a light crimping, which enables the pre-fixed process to the board.
sApplications
Note PC, Small business equipment
Board pre-fixed mechanism
B170
sProduct Specifications
Current rating (Note 1) Rating Insulation Displacement Cable Size Voltage rating Item 1. Insulation Resistance 2. Withstanding voltage 4. Vibration 6. Temperature Cycle 1000M ohms Min No flashover or insulation breakdown. No damage, cracks, or parts looseness. Crimping Specification 500V DC 650V AC/1 minute 100mA Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% Manual soldering: 300c for 3 seconds Crimping Cable Size
AWG 24 AWG 26 AWG 28 : 3A : 2A : 1A
Operating Temperature Range Operating Moisture Range
-30 to +85c(Note 2) -40 to 80%
AWG 26, 28 : 1A
Storage Temperature Range -10 to +60c Storage Moisture Range -40 to 70%
250V AC Insulation Displacement
100V AC
Condition
3. Crimping Area Resistance 30m ohms Max. 5. Humidity (Steady state) Contact resistance: 30m ohms Max Insulation resistance:500M ohms Min 7. Resistance to Soldering heat No deformation of components affecting performance.
Contact resistance: 30m ohms Max Insulation resistance: 1000M ohms Min Flow: 250c for 10 seconds
Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
sMaterial
Product Crimping Plug Crimping Contact for Plug Insulator Displacement Plug Part Insulator Contact Insulator Contact Material Polyamide Brass Polyamide Phosphor copper Finish Black Tin plating Black Tin plating Remarks UL94V-0 ------- UL94V-0 -------
sOrdering Information
qConnector
DF4
q q Series Name: DF4 w Number of Contact: 2 to 15, 4 to 32 e Connector Type P: Single row plug DP: Double row plug
-*P-2C
w e r t r Contact Pitch: 2mm t Connection Type C: Crimping socket R26: Insulator displacement plug for AWG26 R28: Insulator displacement plug for AWG28
qContact
DF4
q Applicable cable size 2428 : AWG24 to 28
- 2428- PCE
q w w Packaging Type PCF: Plug contact/Reel PC: Plug contact/Bag
B171
sSingle Row Crimping Plug
[Specific No.] - **, (**) Blank: 1 bag: 100pcs. (40): 500pcs. packaging (41): 1000pcs. packaging
Photo: Contact insertion state.
qApplicable Through-hole Diameter : O0.8+0.1 +0
Unit:mm Part Number DF4- 2P-2C (**) DF4- 3P-2C (**) DF4- 4P-2C (**) DF4- 5P-2C (**) DF4- 6P-2C (**) DF4- 7P-2C (**) DF4- 8P-2C (**) CL No. 544-0003-4-** 544-0004-7-** 544-0005-0-** 544-0006-2-** 544-0007-5-** 544-0008-8-** 544-0009-0-** Number of Contacts 2 3 4 5 6 7 8 A 04.5 06.5 08.5 10.5 12.5 14.5 16.5 B 02.0 04.0 06.0 08.0 10.0 12.0 14.0 Part Number DF4- 9P-2C (**) DF4-10P-2C (**) DF4-11P-2C (**) DF4-12P-2C (**) DF4-13P-2C (**) DF4-14P-2C (**) DF4-15P-2C (**) CL No. 544-0010-0- ** 544-0011-2- ** 544-0012-5- ** 544-0013-8- ** 544-0014-0- ** 544-0015-3- ** 544-0016-6- ** Number of Contacts 09 10 11 12 13 14 15 A 18.5 20.5 22.5 24.5 26.5 28.5 30.5 B 16.0 18.0 20.0 22.0 24.0 26.0 28.0
Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag.
sCrimping Contact
Part Number DF4-2428PCF DF4-2428PC CL No. 544-0020-3 544-0021-6 Packaging Type Reel Bag Quantity 10,000 100 Finish Tin plating Tin plating
qApplicable Cable (Tin plating Annealed copper wire)
Conductor Size AWG24 (11 cores./0.16mm) AWG 26 (7cores./0.16mm) AWG 28 (7cores./0.127mm) Recommended Cable UL1061 UL1061/1007 Jacket Diameter
O0.75 to O1.2mm
Note:If other cables are used instead of the applicable cable, contact Hirose sales department. q Strip Length: 1.3 to 1.9mm
BApplicable Crimping Tool
Type Applicator Press Main Unit Part Number AP105-DF4-2428P CM-105 CL No. 901-4539-0 901-0005-4 550-0173-6 550-0179-2 Applicable Contact DF4-2428PCF
-------
DF4-2428PC DF4-2428PCF
Manual Crimping Tool DF4-TA2428HC Extraction Tool DF-C-PO (B)
Note: If any trouble has occurred due to other tools, which are not designated by Hirose, Hirose won't guarantee any products.
B172
sDouble Row Crimping Plug
Photo: Contact insertion state q Applicable Through-hole Diameter O0.90.05
Note:The dip side may be deviated according to the cable thickness and the crimping contact bent up/down.
Unit:mm Part Number
DF4-04DP-2C (**) DF4-06DP-2C (**) DF4-08DP-2C (**) DF4-10DP-2C (**) DF4-12DP-2C (**) DF4-14DP-2C (**) DF4-16DP-2C (**) DF4-18DP-2C (**) DF4-20DP-2C (**) DF4-22DP-2C (**) DF4-24DP-2C (**) DF4-26DP-2C (**) DF4-28DP-2C (**) DF4-30DP-2C (**) DF4-32DP-2C (**)
CL No. 544-0078-3-** 544-0079-6-** 544-0080-5-** 544-0081-8-** 544-0082-0-** 544-0083-3-** 544-0084-6-** 544-0085-9-** 544-0086-1-** 544-0087-4-** 544-0088-7-** 544-0089-0-** 544-0090-9-** 544-0091-1-** 544-0092-4-**
Number of Contacts 04 06 08 10 12 14 16 18 20 22 24 26 28 30 32
A 04.8 06.8 08.8 10.8 12.8 14.8 16.8 18.8 20.8 22.8 24.8 26.8 28.8 30.8 32.8
B 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0
[Specific No.] - **, (**) Blank: 1 bag: 100pcs.
Note 1.The quantity at the specific No. "None" is delivered per bag (100pcs.). If needed, please order the products per bag.
B173
sRight Angle Type ID Plug
Photo: Contact insertion state.
qApplicable Through-hole Diameter : O0.8+0.1 +0
Note 1. The plug, which has the mark at the designated position, is for AWG26. Note 2. The cleaning by heat and trichloroethylene an't be implemented.
qApplicable Cable (Tin plating Annealed copper wire)
Part Number DF4-*PA-2R26 DF4-*PA-2R28 Applicable Cable UL1061 AWG26 (7/0.16) UL1061 AWG28 (7/0.127) Jacket Diameter O0.9 to 1mm O0.9 to 1mm
[Specific No.] - **, (**) Blank: Tin plating, 1 pack: 100pcs.
qAWG26
Part Number CL No. Number of Contacts 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0
DF4-02PA-2R26 (**) 544-0022-9-** DF4-03PA-2R26 (**) 544-0023-1-** DF4-04PA-2R26 (**) 544-0024-4-** DF4-05PA-2R26 (**) 544-0025-7-** DF4-06PA-2R26 (**) 544-0026-0-** DF4-07PA-2R26 (**) 544-0027-2-** DF4-08PA-2R26 (**) 544-0028-5-** DF4-09PA-2R26 (**) 544-0029-8-** DF4-10PA-2R26 (**) 544-0030-7-** DF4-11PA-2R26 (**) 544-0031-0-** DF4-12PA-2R26 (**) 544-0032-2-** DF4-13PA-2R26 (**) 544-0033-5-** DF4-14PA-2R26 (**) 544-0034-8-** DF4-15PA-2R26 (**) 544-0035-0-**
Unit:mm B 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0
qAWG28
Part Number CL No. Number of Contacts 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0
DF4- 2PA-2R28 (**) 544-0036-3-** DF4- 3PA-2R28 (**) 544-0037-6-** DF4- 4PA-2R28 (**) 544-0038-9-** DF4- 5PA-2R28 (**) 544-0039-1-** DF4- 6PA-2R28 (**) 544-0040-0-** DF4- 7PA-2R28 (**) 544-0041-3-** DF4- 8PA-2R28 (**) 544-0042-6-** DF4- 9PA-2R28 (**) 544-0043-9-** DF4-10PA-2R28 (**) 544-0044-1-** DF4-11PA-2R28 (**) 544-0045-4-** DF4-12PA-2R28 (**) 544-0046-7-** DF4-13PA-2R28 (**) 544-0047-0-** DF4-14PA-2R28 (**) 544-0048-2-** DF4-15PA-2R28 (**) 544-0049-5-**
Unit:mm B 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0
Note : A packaging quantity is delivered in the bag unit (100 pcs.). If needed, please order the product per bag.
B174
sStraight Type ID Plug
Photo: Contact insertion state.
qApplicable Through-hole Diameter : O0.8+0.1 +0
Note 1. The plug, which has the mark at the designated position, is for AWG26. Note 2. The cleaning by heat and trichloroethylene can't be implemented.
qApplicable Cable (Tin plating Annealed copper wire)
Part Number DF4-*P-2R26 DF4-*P-2R28 Applicable Cable UL1061 AWG26 (7/0.16) UL1061 AWG28 (7/0.127) Jacket Diameter O0.9 to 1mm O0.9 to 1mm
[Specific No.] - **, (**) Blank: Tin plating, 1 pack: 100pcs.
qAWG26
Part Number CL No. Number of Contacts 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0
DF4-02P-2R26 (**) 544-0050-4-** DF4-03P-2R26 (**) 544-0051-7-** DF4-04P-2R26 (**) 544-0052-0-** DF4-05P-2R26 (**) 544-0053-2-** DF4-06P-2R26 (**) 544-0054-5-** DF4-07P-2R26 (**) 544-0055-8-** DF4-08P-2R26 (**) 544-0056-0-** DF4-09P-2R26 (**) 544-0057-3-** DF4-10P-2R26 (**) 544-0058-6-** DF4-11P-2R26 (**) 544-0059-9-** DF4-12P-2R26 (**) 544-0060-8-** DF4-13P-2R26 (**) 544-0061-0-** DF4-14P-2R26 (**) 544-0062-3-** DF4-15P-2R26 (**) 544-0063-6-**
Unit:mm B 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0
qAWG28
Part Number CL No. Number of Contacts 02 03 04 05 06 07 08 09 10 11 12 13 14 15 A 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0 30.0 32.0
DF4- 2P-2R28 (**) 544-0064-9-** DF4- 3P-2R28 (**) 544-0065-1-** DF4- 4P-2R28 (**) 544-0066-4-** DF4- 5P-2R28 (**) 544-0067-7-** DF4- 6P-2R28 (**) 544-0068-0-** DF4- 7P-2R28 (**) 544-0069-2-** DF4- 8P-2R28 (**) 544-0070-1-** DF4- 9P-2R28 (**) 544-0071-4-** DF4-10P-2R28 (**) 544-0072-7-** DF4-11P-2R28 (**) 544-0073-0-** DF4-12P-2R28 (**) 544-0074-2-** DF4-13P-2R28 (**) 544-0075-5-** DF4-14P-2R28 (**) 544-0076-8-** DF4-15P-2R28 (**) 544-0077-0-**
Unit:mm B 02.0 04.0 06.0 08.0 10.0 12.0 14.0 16.0 18.0 20.0 22.0 24.0 26.0 28.0
Note : A packaging quantity is delivered in the bag unit (100 pcs.). If needed, please order the product per bag.
B175
BID Tool
Type DF3-DF4 Table Insulation Displacement Machine Part Number
SA701/DF3 903-4507-7
Objective Connector
DF3-*S-2R** DF4-*P/PA-2R**
Remarks
Desk top machine
BPrecautions
1. Recommended 1. Soldering Condition
Flow: 250c for 3 seconds Manual soldering: 290c for 2 seconds
s If the cable neighboring the connector is bent and unstraightened, secure a large bending radius because the Jacket will be broken by the solder heat and the contact wire will be exposed.The Jacket in this part will be tore.
s After the soldering process. If a stress is applied to the cable in the state where the connector and the cable has heat inside, the Jacket hold area will be loosen. Therefore, carry out the post-soldering operation after the connector has returned to the room temperature.. 2. Cleaning Condition Refer to Nylon Connector Use Hand book. Don't use a solvent such ass trichloroethylene which invades the cable Jacket. In addition, avoid heat cleaning by a solvent. 3. Connection Condition Refer to the Nylon Connector Use Hand book.
B176

▲Up To Search▲

Price & Availability of DF4-9PA-2R28

	To Download DF4-9PA-2R28 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .